Technical standards and descriptions of halls at Munich Trade Fair Centre

Halls	A1-A6 B1-B5	B6 (high hall)	C1-C3	C4	B0 (ICM)
Length	161 m	161 m	143 m	139 m	65 m
Width	71 m	71 m	71 m	71 m	54 m
Total exhibition area	approx. 11,000 m²	approx. 11,000 m²	approx. 10,000 m²	approx. 10,000 m²	approx. 3,500 m²
Clearance height of longitudinal walls (along edge of hall between entrances)	approx. 5.70 m	approx. 7.80 m	approx. 5.70 m	approx. 5.70 m	approx. 4.00 m (edge of hall)
Clearance height of hall grider supports (along sides of hall)	approx. 10.75 m	approx. 15.25 m	approx. 10.75 m	approx. 10.75 m	-------
Clearance height of beam ties (hall center)	approx. 11.5 m	approx. 16 m	approx. 11.5 m	approx. 11.5 m	approx. 4.20 m (hall center)
Hall floor covering	Mastic asphalt	Mastic asphalt	Mastic asphalt	Mastic asphalt	Parquet
Permissible floor load	5 t/m² (50 kN/m²)	5 t/m² (50 kN/m²)	5 t/m² (50 kN/m²)	5 t/m² (50 kN/m²)	2 t/m² (20 kN/m²)
Permissible point load (0.3 x 0.3 m) (does not apply to utility duct covers)	10t (100 kN)	10t (100 kN)	10t (100 kN)	10t (100 kN)	8t (80 kN)
Permissible vertical load per suspension point	100 kg (1KN)	100 kg (1KN)	100 kg (1KN)	100 kg (1KN)	100 kg (1KN)
Entrance gates:
Vehicle access: (size) and [number]	(4.5 x 4.5m) [6]	(4.5 x4.5m) [8]	(4.5 x 4.5m) [6]	(4.5 x 4.5m) [8]	-------
No vehicle access (size) and [number]	(2.5 x 4.5m) [6]	(2.5 x 4.5m) [2]	(2.5 x 4.5m) [4]	(2.5 x 4.5m) [2]	(12.5x 4 m) [1]
Artificial illumination	100 Lux/m²	100 Lux/m²	100 Lux/m²	100 Lux/m²	400 Lux/m²
Ventilation	Partially air-conditioned	Partially air-conditioned	Partially air-conditioned	Partially air-conditioned	Partially air-conditioned
Utilities supplied via ducts that cross halls at right angle to longitudinal walls. Distance between duct centers:	5 m	5 m	4.5 m (*)	4.5 m	4.85 m
Width of utility ducts	0.35 m	0.35 m	0.35 m	0.35 m	0.35 m
Width of duct covers	0.43 m	0.43 m	0.43 m	0.43 m	0.43 m
Utility connections
Water	diam. 25 / min. 3.5 bar	diam. 25 / min. 3.5 bar	diam. 25 / min. 3.5 bar	diam. 25 / min. 3.5 bar	diam. 25 / min. 3.5 bar
Waste water	diam. 100	diam. 100	diam. 100	diam. 100	diam. 100
Sprinklers	diam. 50	diam. 50	diam. 50	diam.50	diam. 50
Compressed air	diam. 50 / min. 10 bar	diam. 50 / min. 10 bar	diam. 50 / min. 10 bar	diam. 50 / min. 10 bar	diam. 50 / min. 10 bar
Gas	diam. 25 / 20 mbar	diam. 25 / 20 mbar	diam. 25 / 20 mbar	diam. 25 / 20 mbar	diam. 25 / 20 mbar
Electricity	200 W/m²	200 W/m²	200 W/m²	200 W/m²	200 W/m²
Telecommunications
User-independent wireline connections (telephone, fax, ISDN, LAN)	300	300	300	300	100
Wireless telephone connections (DECT)	approx. 100	approx. 100	approx. 100	approx. 100	approx. 50
Broadband connections (TV, satellite)	150	150	150	150	56
Fiber-optic connections (single-mode and/or gradient fiber)	150	150	150	150	56
(*) Hall C1 also has two utility ducts that run parallel to the longitudinal walls.

Outdoor exhibition site
Width of access roads	8 m / 12 m
Road surface	Asphalt
Surface of exhibition area	Seeded gravel bed (grassed-over gravel-humus mixture, stony in parts)
Max. permissible load	50t/m² (500kN/m²)
Illumination	30 Lux/m²
Utilities
- Water supply	diam. 40 / 3.5 bar
- Waste water/ sewage	DN100
Electricity	50 W/m²
Telecommunications
- User-independent wireline connections (telephone, fax, ISDN, LAN)	1400
- Wireless telephone connections (DECT)	approx. 200
Broadband connections (TV, satellite)	100
Fiber-optic connections (single mode and/or gradient fiber)	approx. 100

Separate technical guidelines apply to the foyer of the ICM.
Floors – Permissible loads – Gates

General:
With the exception of Hall B0, motor vehicles can be driven into the halls. However, doing so is only permissible at walking pace. The underfloor utility ducts can withstand the weight of a vehicle when covered. With an evenly distributed load, their load-bearing capacity corresponds to that of the general load-bearing capacity of the floor in question. The maximum point loads posted for the hall floors does not apply to the areas near the utility ducts.

The weight limits posted for the passenger and freight elevators may not be exceeded under any circumstances. Passenger elevators and escalators may not be used to transport freight.

Any damage caused by non-compliance with these guidelines must be remedied by MMG at the expense of the exhibitor and/or his agents.

A description of the halls and the outdoor exhibition area can be download here: PDF file